Get more exposure for your business with the new HTML5 flipbooks.
Learn more

nearthan

Published on December 8, 2015

For more classes visit www.indigohelp.com 1. Determine the conversion time for an ADC0804 (8-bit), where 66 clocks per bit are required, if its clock frequency is 50 kHz. 2. If an 8-bit SAR has Vref = 10 V, what is the binary value for an input voltage of 7.28 V? 3. What is the percent error for the binary answer found in Problem #2? 4. Given an 24 MHz bus speed. Write down the line(s) of instruction which set the ATD1 unit for 2MHz conversion frequency, 10-bit resolution and 8 A-to-D clocks per sample time. 5. A single 10-bit, left justified conversion of 3.75V is complete in ATD0. Assume and i. Name the register(s) where the result of the conversion is found ii. What are the values in each of the 16-bits of this register after conversion is complete? Assume the result is unsigned. Show work 6. Assume that a position-sensitive potentiometer can measure up to 25 cm over a voltage range of 0 to 5 V. If